Gas insulating switchgear, high voltage direct current transmission, microgrids and renewable energy. ABB is involved in all of it.
The Swiss company with a historic tradition of energy industry innovations also has gone through plenty of change lately. ABB is selling its power grids division to Hitachi, but is hardly slowing down on its offering of new products.
ABB recently unveiled its first energy storage project and opened a new product development center in Connecticut. Cloud computing and robotics are additional endeavors for the ever evolving firm.
A group of four ABB executives recently answered questions from Power Engineering content director Rod Walton, touching on topics such as the development of more environmentally friendly switchgear, high voltage direct current transmission and connecting utility-scale renewable energy to load centers.
Here are the answers from ABB leaders. ABB will be involved as presenters at both POWERGEN International, happening Nov. 19-21 in New Orleans, and DISTRIBUTECH International happening this February in San Antonio.
Late last year, ABB won a contract to upgrade a high-voltage substation for Germany’s TransnetBW, replacing gas-insulated switchgear using an alternative to the industry standard SF6….Tell us why this is an important milestone?
“ABB pioneered gas-insulated switchgear (GIS) technology five decades ago with the installation of the first high-voltage GIS with sulfur hexafluoride (SF₆) gas underground in the heart of Zurich, Switzerland. SF₆ gas has been used extensively in the electrical industry for decades due to its excellent insulating and arc-extinguishing properties. However, it is a greenhouse gas with high global warming potential and ABB has been working on eco-friendly alternatives.
“In 2014, ABB announced a significant breakthrough with the development of a solution that deploys a new insulation gas mixture as a substitute for SF₆. This alternate gas mixture has similar insulation properties as SF₆ gas now used in switchgear, but can substantially lower environmental impact due to its extremely low global warming potential. In 2015, ABB successfully commissioned the world’s first 170 kV GIS substation using alternative gas mixture, AirPlus for Swiss leading utility, ewz in Zurich, Switzerland. The technology reduces almost 100 percent of the global warming potential (GWP), compared with SF6.
“The Obermooweiler GIS substation for Germany’s TransnetBW is a further important milestone in the development of eco-friendly technology, which will be the first of its kind at 420 kV. It is based on the proven AirPlus technology which we have we gained extensive field experience since our pilot installation in 2015 in Zurich. This solution will help TransnetBW in lowering their carbon footprint without compromising reliability and performance. It will also be Germany’s first GIS substation that uses an environmentally friendly alternative gas mixture to the industry standard SF₆, which helps to support the country’s targeted reduction of up to 95 percent by 2050.”
– Markus Heimbach, Global Managing Director for High Voltage, ABB Power Grids
- Leakage rates are known to be low for SF6 and it’s obviously an effective dielectric medium for switchgear? Why move away from it?2.
“Indeed SF₆ gas has excellent electrical insulation and current interruption properties and therefore has been extensively used in the electrical industry for decades. Leakage rates of modern switchgears are extremely low, thus one efficient way is to replace aging switchgear with modern ones. Despite this, SF₆ has drawback – it is a greenhouse has with extremely high GWP and its lifecycle management requires careful handling and can entail substantial costs, particularly when decommissioning aging substations. Therefore, ABB is supporting national and international regulators to limit the impact of SF6 emissions, by continuously reducing the SF6 usage in our products and decreasing SF6 emissions using in controlled and quantifiable measures. And of course through development of portfolio with alternative gasses such as our AirPlus platform.”
- Let’s talk about something more recent than the TransnetBW project. In April, ABB launched its latest live tank breaker with the trademarked AirPlus technology. This sounds like a massive move forward for the company?
“Yes, we are committed to gradually offer new products with alternative gases to SF₆. The first Live Tank Breaker (LTB) 72.5 kV with AirPlus was already introduced in 2014 and is successfully operating in over 80 installations around the globe for example in Sweden and Denmark.
“In April this year at Hannover Fair, we launched the LTB 145 kV AirPlus which represents another breakthrough in our journey of eco-efficient innovation. This same technology is tried and proven which has already been operating flawlessly in a pilot substation in Sweden since 2010. It occupies the same footprint of a standard SF₆ LTB making substation refurbishment and breaker replacements easy to execute. The technology is also available as a disconnecting circuit breaker (DCB), which means the disconnecting function is integrated with the breaker. This enables high equipment availability and reliability in a compact footprint.”
- What are the risks, if any, in the shift to this level of transmission and distribution equipment and insulators?
“As with any new technology, it must be thoroughly tested and proven according to the different standards (e. g. IEEE or IEC). Moreover, every product needs to go through a long-term testing and pilot installations before releasing it to the market.”
- How do you see the potential market for high voltage direct current (HVDC) transmission in light of all the utility-scale wind and solar capacity growing? Has it surprised you how this sector has evolved since announcing the most recent generation of ABB HVDC transformers in 2012?
“The HVDC interconnection market is expected to continue to grow globally, alongside the growth of the renewables sector, as HVDC is the most efficient way to transmit renewable power over long distances to the end consumers. The offshore wind market is growing in most regions of the world, supporting the increasing generation mix change to renewables, including the NAM region.
“ABB pioneered commercial HVDC technology more than sixty years ago with the Gotland HVDC link in 1954 and introduced crucial innovations like HVDC Light in 1997 and ultra-high HVDC (UHVDC) transmission with 1100kV DC in China to ensure reliable and efficient power supplies.
“We believe there is great potential for rapid growth of HVDC transmission in North America. With the accelerated pace of retiring fossil fuel generation facilities – which historically were located near major load centers – and the rapid growth of utility-scale wind and solar capacity to replace such generation, the requirements on the existing transmission grid are about to change. HVDC technology has the right characteristics to meet the new demands.
“Since the development of utility-scale wind and solar facilities are driven by favorable wind and solar intensity conditions, major renewable resources are often located far away from major population and load centers. For example, some of the best wind resources in New England and New York are either far offshore or to the north, whereas the major population and load centers are in the south. Hence, to deliver reliable renewable energy from new resources to major population and load centers, new transmission line capacity will be needed. In addition, since the voltage control and reactive power needs at load centers were historically supported by local fossil-fuel based generators, new devices will be needed at the load centers for such support.”
– Roger Rosenquist, Vice President, Business Development, Grid Integraion, ABB Power Grids North America
- Is the T&D side of renewable integration keeping pace with the actual capacity growth of wind and solar? Where is this most visible?
“As the capacity growth of wind and solar continues to increase, ABB has observed that the additional renewable generation does impact the both transmission grid as well as the distribution system. An ABB analysis revealed that for many geographies, curtailment can start when renewable capacity reaches about 25% of annual demand. When approximately half of the generation resources are renewable, curtailment might reach 5-10%. At this point, adding additional renewable generation capacity would result in increasingly smaller additions in the level of delivered renewable generation. On a grid that currently faces regional constraints, this saturation effect and curtailment may begin even earlier.
“The transmission grid can be constrained based by the distances between generation sources and the major grid load points, shifting generation resource locations, transmission congestion, limited grid scale storage and the need to always balance load and generation. Other concerns focus on the need for increased spinning reserves to address the variability of renewal generation and the need for FACTS investments to offset the potential loss of system inertia and available short circuit current. When coal and nuclear resources are retired and replaced with renewable generation and storage that connect to the grid through power electronics these grid impacts can occur. Also,depending on the generation mix of renewable generation, ramping generation, and baseload generation, transmission capacity for importing power may be needed to meet evening peak demand and to export surplus renewable generation that would otherwise need to be curtailed. Solutions include adding transmission capacity, energy storage, and demand response programs that can shift load to times when the nondispatchable and variable renewable generation is available.”
– Gary Rackliffe, Vice President, Smart Grid solutions, ABB Power Grids North AmericaThe potential for offshore wind seems to be finally turning a corner in North America with new projects being announced. How does ABB see itself engaged in these developments?
- The potential for offshore wind seems to be finally turning a corner in North America with new projects being announced. How does ABB see itself engaged in these developments?
“ABB has a long history as a critical partner for developers and utilities building large offshore AC/DC wind parks, specifically in Europe and also Asia. In the US, ABB has been a partner in the onshore wind market since its beginning helping to pioneer ANSI/IEEE product development as well as to support the transition of those companies that have brought their expertise from Europe and Asia to the US market. With such a large portfolio of technologies available in transmitting energy to the grid, ABB is able to offer many unique alternatives to improve functionality, increase reliability, reduce the footprint and simplify execution and operation. Our experience has also made us even a better partner for developing solutions specifically for the unique demands of these systems such as hybrid reactive power compensation systems that react quickly to balance the grid down to specialized switchgear designed to fit within the turbines and allow for the simplified architecture of the system needed to bring the power onshore. Beyond the technology, ABB is engaged with all the Regional ISO/RTO’s and every major utility that will receive this new energy into their system and understands their unique constraints and preferences. ”
–Bart Gaskey, Vice President, Strategic Marketing, ABB Power Grids North America