Siemens launches gearless wind turbine for low to moderate wind speeds

Brussels, Germany, March 14, 2011 — Siemens Energy launched a new direct drive gearless wind turbine for low to moderate wind speeds at the EWEA 2011 wind power exhibition and conference in Brussels.

The core feature of the new SWT-2.3-113 wind turbine is a drive concept with a compact permanent magnet generator. This type of generator is characterized by its simple, robust design, requiring no excitation power, slip rings or excitation control systems. This results in high efficiency even at low loads.

With a capacity of 2.3 MW and a rotor diameter of 113 meters the new wind turbine is designed to maximize power production at sites with low to moderate wind speeds. The SWT-2.3-113 is fitted with the new Siemens B55 Quantum Blades.

This new blade design boosts efficiency and optimizes performance. A prototype of the new machine was installed in the Netherlands in March.

The SWT-2.3-113 is the second gearless wind turbine launched by Siemens. Like the SWT-3.0-101, the 3-MW direct drive wind turbine launched by Siemens in April 2010, the new SWT-2.3-113 features only half of the parts required for a conventional geared wind turbine and a smaller number of moving parts.

Together with the SWT-2.3-113 Siemens is introducing the Quantum Blade, a new generation of rotor blades. The new blade is lighter than previous models but retains the superior strength of earlier generations. The new B55 Quantum Blade used for the new wind turbine is 55 meters long and features a redesigned tip and root section.

The root section uses Siemens “flatback” profiles to minimize root leakage and provide greater lift. The blade tip has also been redesigned to minimize loads and reduce noise levels. With a noise level of only 105 decibels the SWT-2.3-113 is one of the quietest wind turbines on the market.

To date, Siemens has installed and commissioned a total of five gearless SWT-3.0-101 wind turbines in Denmark and Norway. Further projects with Siemens direct drive wind turbines are planned in the U.S., Denmark and Germany.

In addition to these two new wind turbines with ratings of 3 MW and 2.3 MW, further turbines are already at the planning stage. 


Previous articleAlstom to retrofit generators at coal-fired plant in Poland
Next articleElster works with SAIC to deliver comprehensive smart grid as a service

No posts to display