Siemens providing grid access for offshore wind energy project

Erlangen, Germany, December 14, 2009 — With its 175 wind power turbines and a total capacity of 630 MW, the London Array offshore wind energy project will be one of the largest of its kind in the world.

After Siemens Energy was already appointed to supply the turbines for the wind farm, the company also received the order to connect London Array to the power supply network.

Purchasers are Dong Energy, E.ON and Masdar, the wind farm’s owners. The wind farm is scheduled to be completed by 2012 and will be hooked up to London’s power supply network via the Siemens grid connection.

The wind farm is being erected in the Thames estuary about twenty kilometers off the Kent and Essex coasts. An option is also provided for uprating London Array to as much as 1,000 MW.

The wind farm will thus become the first in the 1-GW class. That will be sufficient to supply 750,000 British households with renewable energy, which is equivalent to about a quarter of the population of Greater London.

Siemens will supply the electrical equipment for two offshore substation platforms, which will be installed right at the wind farm. The substations bundle the power generated by the 175 Siemens SWT-3.6 wind turbines, each rated at 3,6 MW, before it is transported via high-voltage subsea cable to the coast.

On each of the platforms there are two 180-MVA transformers and medium-voltage switchgear. The requisite protection and instrumentation and control equipment is also installed on the platforms.

Distribution over two platforms has the advantage that the cable routes within the wind farm are short, and power transmission losses are kept as low as possible to enhance the wind farm’s energy efficiency.

The transformers on the substation platforms step up the 33 kilovolts (kV) generated by the wind turbines to a transmission voltage of 150 kV.

High-voltage subsea cables transport the electricity to the grid access point, which is located in Cleve Hill. In addition to a substation with four 180-MVA power transformers (400/150 kV) Siemens will also install four 50-MVAr reactive-power compensators at this access point to fulfill the British grid’s requirements on the quality of the electrical energy fed into the grid.

For that purpose Siemens will deploy its new SVC Plus system. It operates with innovative voltage-sourced converter technology and is continuously controllable with the aid of insulated-gate bipolar transistors.

The central feature of SVC Plus, a further refined statcom (static synchronous compensator), is its modular multilevel converter technology.

By contrast with other self-commutated converter topologies the voltage waveform generated is practically sinusoidal because of the multilevel technology. This means that the low-frequency harmonic filters required in solutions used to date are no longer needed and significantly less space is required for the overall system.

Siemens will also prepare the requisite design studies for grid access for all of the wind farm’s electrical components and prepare the grid studies to demonstrate fulfillment of grid access requirements.

 

Previous articleGeothermal grows as renewable energy source in 2009
Next articleComverge selected for Oklahoma smart grid program

No posts to display