University saves energy with geothermal system

Rolla, Mo., April 23, 2012 — By the time a geothermal energy project at Missouri University of Science and Technology is completed in 2014, the campus’s annual energy use will be cut in half and its carbon footprint reduced by 25,000 metric tons per year.

University officials broke ground on the project on April 17 by drilling a hole in one of the geothermal well fields northeast of Emerson Hall, the campus’s electrical and computer engineering building.

Missouri S&T’s geothermal energy system will replace the university’s aging coal-fired power plant, which was constructed in 1945.

In 2010, the University of Missouri System Board of Curators approved Missouri S&T’s plan to construct the geothermal system. Initially, the system is expected to save more than $1 million annually in energy and operational costs, but that savings is expected to grow to $2.8 million a year.

The project will also eliminate a backlog of about $26 million in deferred maintenance costs for the aging power plant. Those costs include the replacement of boilers, steam lines and other antiquated infrastructure.

The geothermal system will also reduce Missouri S&T’s environmental impact. It is expected to reduce Missouri S&T’s carbon dioxide emissions by 25,000 metric tons per year — roughly the equivalent of the greenhouse gas emissions of 4,600 passenger vehicles a year, Schrader says.

The system will also reduce Missouri S&T’s water usage by about 10 percent, or 8 million gallons per year.

Construction of the geothermal system will officially begin in May with the drilling of ground-source wells around campus. Pipes will be installed in the wells and connected to create closed geothermal loops. Water will be circulated through the loops from three campus geothermal plants that will be constructed as part of the project.

The system will allow energy to be stored in and reclaimed from well fields around campus. Approximately 600 wells will serve the three campus geothermal plants. Drilling will begin in May and continue through the summer.

The geothermal plants will be housed in Emerson Hall, McNutt Hall and a future building that will be constructed in 2013 and 2014. That building, James E. Bertelsmeyer Hall, will house S&T’s chemical and biological engineering department.

Each of the three plants will contain heat pump chillers, supplemental cooling towers and gas-fired boilers to provide geothermal energy to surrounding areas of campus.

Once the geothermal project is completed in 2014, it will provide heating energy to 15 campus buildings as well as cooling energy to the campus chilled-water system, which serves much of the campus. Stand-alone equipment will be housed in the remaining campus buildings that currently are heated by steam from the power plant.

Upon completion of the geothermal project, the power plant boilers will be decommissioned.

The project is funded through the sale of $32.4 million in revenue bonds, approved by the curators in November 2010. The university plans to repay the debt over 30 years through savings from the project.


Previous articleAlstom to modernize critical Alaska transmission line
Next articleE.ON UK chooses Elster for smart metering deployment

No posts to display