Beacon Power adds 1 MW of energy storage to New England power grid

John Egan Normal.dotm 0 0 2009-11-30T23:07:00Z 2009-11-30T23:07:00Z 1 467 2665 PennWell 22 5 3272 12.0 0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:”Table Normal”; mso-style-parent:””; font-size:12.0pt;”Times New Roman”;}

Tyngsboro, Mass., December 17, 2009 — Beacon Power Corporation connected and integrated an additional MW of flywheel energy storage on the New England power grid.

This brings to 3 MW the total capacity now in operation and earning revenue from frequency regulation services.

Beacon is a company that designs, develops and is commercializing advanced products and services to support more stable, reliable and efficient electricity grid operation.

Beacon added the third MW as part of a planned expansion of the system that has been providing regulation service to the grid from the company’s Tyngsboro, Mass., headquarters since November 2008, when the first MW was connected.

In July 2009, Beacon connected a second MW, running separately on a different power line at the same site. Beacon has now successfully integrated multiple megawatts of flywheel energy storage as a system, operating on the same grid connection with unified supervisory software and operational control systems.

“This latest achievement verifies our ability to interconnect, operate and control two 1-MW modules as an integrated subsystem of a full-scale 20-MW plant. Our 20-MW plants will be constructed by linking ten 2-MW subsystems together to achieve the full capacity,” said Bill Capp, Beacon president and CEO.

“This ability to expand incrementally using 2-MW building blocks is a key technical element in our plan to build plants quickly and cost-effectively. Our 20-MW facility in Stephentown, New York, where construction has already begun, will utilize this same approach.”

Flywheel Energy Storage and Frequency Regulation

Frequency regulation is an essential service that helps balance the flow of electricity on the grid, minimize harmful fluctuations, and maintain proper grid frequency.

Beacon’s fast-response, 20-MW flywheel energy storage plants will serve as a type of “shock absorber” to the grid. Because of their speed of response, flywheels can address and correct frequency deviations more effectively than conventional regulation methods — and at lower cost of operation.

The constantly spinning, high-performance flywheels perform this service by speeding up and slowing down as they absorb and inject electricity from and to the grid.

This helps keep the frequency of the alternating current (AC) at 60 cycles per second, and helps prevent grid instabilities from becoming costly regional outages.

Beacon’s flywheel systems also make it easier for the grid to integrate intermittent renewable energy sources, such as wind and solar power, whose variability increases the need for regulation.

Because Beacon’s flywheels only recycle electricity already generated, they do not consume fossil fuel or produce greenhouse gas emissions or other air pollutants.

In addition, the energy capacity of flywheels does not degrade over time or as a function of the number of charge/discharge cycles incurred, nor do they contain toxic chemicals or hazardous materials.


Previous articleKyocera solar modules generate 40 MW at Spanish solar power plants
Next articleDayton Power and Light building solar power facility in Ohio
The Clarion Energy Content Team is made up of editors from various publications, including POWERGRID International, Power Engineering, Renewable Energy World, Hydro Review, Smart Energy International, and Power Engineering International. Contact the content lead for this publication at

No posts to display