VIDEO: Southwest Power Pool: EPA power plant regulation possible, but costly

[bc_video account_id=”1214147015″ player_id=”HypJxq3ml” video_id=”4163484950001″ min_width=”480px”]

Southwest Power Pool has released a second analysis of the Environmental Protection Agency’s proposed Clean Power Plan that indicates a regional compliance approach would meet the plan’s 2030 deadline at an estimated cost of $2.9 billion per year in generation-resource capital investment and energy production costs.

SPP‘s analysis also indicates up to 13,900 MW of coal-fired generation beyond current transmission-planning assumptions could be at risk of retirement.

SPP’s latest analysis of the plan’s impact on its footprint focused on regional compliance efforts. The regional transmission organization applied a carbon-cost adder (as a tax on each fossil unit’s CO2 emissions) and added it to existing resource plans. SPP’s assessment found an adder between $30-45 per ton would be the most cost-effective in a regional approach.

“Regional compliance with the plan by 2030 is possible, and is likely to be less costly than state-by-state compliance,” said Lanny Nickell, vice president of Engineering for SPP. “Our evaluation of a regional approach showed applying a carbon-cost adder is effective, but would still require incremental changes to current resource plans. That will increase the amount of necessary capital investment and lead to higher energy production costs.

“This second analysis does not alter our earlier conclusion that additional infrastructure — and time — is needed to meet the plan’s proposed CO2 emission goals,” Nickell said. “It takes time to develop a stable, secure, efficient and effective bulk electric power system necessary to support changes of the magnitude being proposed by the plan.”

The regional compliance assessment was SPP’s second study of the plan and its impacts on SPP’s region. The study evaluated the plan’s impact on existing generation resources and publically available resource plans. In the process, SPP developed a regional goal based on estimated share of the EPA’s proposed CO2 goals for states with generation in SPP’s region. A third study currently underway will analyze state-by-state compliance.

The assessment did not evaluate infrastructure needed to support regional compliance with the plan. According to its latest report, SPP will require a much more intensive planning effort with its stakeholders to ensure regional compliance, along with new tools and metrics to fully identify the appropriate generation and transmission infrastructure.

SPP’s first plan reliability impact assessment revealed the plan’s implementation timeline does not allow enough time to build appropriate generation and transmission infrastructure. Without needed infrastructure, SPP’s transmission system could face severe overloads, increasing the potential for cascading outages.

The plan would cut existing power-plant carbon emissions from 2005 levels by 30 percent by 2030. Interim goals are to be applied and measured over a 10-year period that begins in 2020, with final goals effective by 2030. The rule would be implemented through state-developed plans that meet state-specific CO2 emission goals set by the EPA, although states will have the option to work together to develop multi-state plans.

Previous articleVIDEO: Rooftop solar, commercial solar power growing in Colorado
Next articlePJM plan to build 800 MW gas-fired power plant moves forward
The Clarion Energy Content Team is made up of editors from various publications, including POWERGRID International, Power Engineering, Renewable Energy World, Hydro Review, Smart Energy International, and Power Engineering International. Contact the content lead for this publication at

No posts to display