ABB extends control system life for combustion turbine at Tasley Energy Center

Las Vegas, Nevada, December 13, 2011 — ABB recently extended the DCS life for the combustion turbine at the Tasley Energy Center in Tasley, Virginia.

The upgrade project extended the life of the ABB control system installed in 1990 to the latest control system offering. Over a five-day outage, the existing control system cabinets were rearranged, including new MMUs, controllers, I/O modules and power systems.

The Allen-Bradley HMI, RS View that was installed years ago to replace the originally supplied PCView, was replaced with an ABB Symphony Plus console. Also included in the project were the addition of OPC connectivity for the RTU, the Allen-Bradley PLC and the interface to the historian. An ABB TAS module for auto synchronization will be supplied in the future.

The same controller configuration provided over 20 years ago in the Network 90 DCS platform is still used today as ABB’s Network 90 DCS has evolved to Infi90, Symphony Harmony and the latest offering, Symphony Plus. While I/O modules were replaced, termination units remained intact so field wiring was not disturbed, further simplifying the commissioning process.

As part of the 1990 controls retrofit project, the originally supplied Westinghouse P51 operator console was replaced with a computer-based PCView operator console that enhanced operational effectiveness by providing process graphics, control/monitor graphics and alarm help screens. These graphics were the basis for the new operator console installed as part of the recent upgrade.

This announcement was made at the Power-Gen International 2011 conference and exhibition in Las Vegas, NV. ABB is exhibiting in booth #4416 in the Las Vegas Convention Center.

Previous articleHitachi to supply pollution controls equipment for KCP&L
Next article1211 Executive Digest.People 1

No posts to display