Westinghouse making nuclear fuel at Columbia for AP1000 units in China

Pittsburgh, December 21, 2010 — Westinghouse Electric Co. has completed preparatory work on fuel for its AP1000 nuclear power plants and manufactured the first four fuel assemblies at the company’s Columbia Fuel Fabrication Facility in South Carolina. This fuel will be used at Sanmen Unit 1, located in the Zhejiang Province of China.

The AP1000 pressurized water reactor (PWR) fuel design uses Robust Fuel Assembly technology, which is already in widespread use in Westinghouse-designed plants. The AP1000 fuel incorporates features to better protect the fuel from coolant debris, improve seismic performance and deliver highly efficient operational performance.

Westinghouse Nuclear Fuel Senior Vice President Joe Belechak said, “Completion of this milestone is a significant achievement for Westinghouse. The AP1000 PWR fuel design is based on our objective to provide customers with high-performing, flawless fuel. The fuel is fabricated using the Westinghouse Manufacturing System, a robust process that combines best practices from the nuclear and manufacturing industries into an integrated system.”

A team comprising more than 100 people across three Westinghouse sites in the U.S. (Columbia S.C., Blairsville, Pa. and Monroeville, Pa.) has been involved in the AP1000 PWR fuel verification program, which began in 2006.

The program took the preliminary AP600/AP1000 fuel design through a comprehensive test and manufacturing development program. All AP1000 PWR component manufacturing was qualified or requalified using advanced supplier quality standards. Upgrades worth $16 million at the CFFF also were implemented.

Sanmen is the site of two Westinghouse AP1000 PWR units that are being built under a contract signed in 2007 for four AP1000 PWRs. Two other AP1000 PWRs are currently under construction at Haiyang, China.

The first of the four units, Sanmen Unit 1, is on schedule to come online in 2013, with each unit thereafter subsequently coming online approximately six months later. Additionally, Westinghouse and China are currently in discussion on plans for more AP1000 units to be sited inland of China’s coastal areas.

The Sanmen and Haiyang sites have been designated for six AP1000 units each and three further multi-unit sites at Xianning, Taohuajiang and Pengze have been prepared in China.

Six other AP1000 units are on order in the United States (Southern Company’s Vogtle 3 & 4, South Carolina Electric & Gas’ Summer 2 & 3 and Progress Energy’s Levy County Units 1 & 2) and interest has been expressed in building AP1000 plants across Asia, Europe, South America and Africa.

The AP1000 nuclear power plant is Westinghouse’s innovative passively safe reactor design, which uses natural cooling, evaporation and condensation to keep the plant safe. This design makes the plant smaller, simpler, easier to build, and less expensive to operate than other modern PWR plants.

Previous articleJury awards developer $1.8 million against Oncor Electric
Next articleBabcock and Wilcox wins nuclear generating station uprate contract

No posts to display