BC Transmission Corp. to deploy high-capacity conductor in transmission reinforcement project

ST. PAUL, Minn., May 14, 2008 – BC Transmission Corp. (BCTC), the transmission system operator for the province of British Columbia, plans to deploy 3M ACCR conductor in two cross-water segments through islands in the Straight of Georgia as part of an upgrade for a transmission line linking Vancouver Island with British Columbia’s lower mainland. The upgrade is known as the Vancouver Island Transmission Reinforcement (VITR) Project.

BCTC is the first Canadian utility to install 3M’s lightweight, high-capacity Aluminum Conductor Composite Reinforced (ACCR) conductor. 3M says ACCR can carry twice the current of conventional steel-core conductors of the same diameter, without requiring larger towers, even across long spans.

The 3M ACCR segments, which include a 5,800-foot single-span crossing the Sansum Channel between Vancouver Island and Salt Spring Island, in addition to a 6,000-foot multi-span crossing, are located about 25 miles north of Victoria, the provincial capital. The installation is currently in progress and scheduled to be completed in June 2008.

According to Tim Koenig, director of the 3M high capacity conductor program, 3M ACCR was chosen, in part, to permit the re-use of existing towers, and avoid potential environmental sensitivities and costs associated with building larger towers for the conventional ACSR conductors.

“Larger towers to accommodate double bundling, for example, would have required bringing heavy equipment into remote areas, some by barge, installing new foundations and guide wires, installing new towers, digging out the existing footings and then transporting the aggregate for an additional 24 towers,” says Koenig.

3M ACCR is currently in service for several domestic utilities, including Xcel Energy in Minneapolis, Platte River Power Authority in Colorado, Arizona Public Service in Phoenix, and Allegheny Power near Washington D.C. In addition, Shanghai Electric Power Company Ltd. and Companhia de Transmissàƒ£o de Energia Elàƒ©trica Paulista (CTEEP) became the first utilities outside of North America to purchase 3M ACCR, choosing it to boost transmission capacity in China and Brazil, respectively.

3M ACCR was developed with the support of the U.S. Department of Energy, which tested the conductor at Oak Ridge National Laboratory (ORNL) in Tennessee, and with early contributions by the Defense Advanced Research Projects Agency. The ORNL tests demonstrated the conductor’s integrity after exposure to temperatures even higher than the rated continuous operating temperature of 210 degrees Celsius. Since 3M ACCR is based on aluminum, it is not adversely affected by environmental conditions, such as moisture or UV exposure, and it has the durability typically associated with all-aluminum conductors.

3M ACCR’s strength and durability result from its core, composed of aluminum oxide (alumina) fibers embedded in high-purity aluminum, utilizing a highly specialized and patented process. The constituent materials are chemically compatible with each other and can withstand high temperatures without adverse chemical reactions or any appreciable loss in strength. The conductor also is highly resistant to corrosion.

More information about the 3M high capacity conductor is available at www.3M.com/accr.


Previous articlePG&E selects Aclara to provide smart meter data access
Next articleItron Selected by CenterPoint Energy as AMI Technology Provider

No posts to display